Full Quiver wrote:So by using a crossover cable I can't just use the one monitor for both towers?
Simple answer No...
Not saying it could not be done. But it would take the following.
1.. A computer with a Bios that does not give an error message saying that is is missing keyboard or mouse etc.
2. An operating system installed on the computer with no login required. Boot up into operating window.
3. Load a software piece that allows remote controll of computer to be controlled by primary computer.. (but most require password entered on 2nd computer to allow remote control)
4. Share the Drive
5. Connect the crossover (null Modem) cable.
------------------------
Or you can install OS on tower computer .
connect keyboard and mouse and monitor.
Turn computer on. Login and share drive.
Unplug keyboard and mouse and monitor and connect back on primary computer . Map a drive to 2nd computer shared drive.
Repeat this every time the power goes out or 2 computer gets turned off..
------------------------------
Additional option is a KVM (Previously mentioned)
Are you familiar with these products.
Keyboard, Video and Monitor..
Comes in 1 KVM and 2 computers to multiples.
I have 2 2 compuer KVM switches and 1- 4 KVM switcher.
Purchased off ebay for abo9ut 20 bucks.
A KVM will allow you to have 1 keyboard , 1 mouse and 1 monitor for two or more computers.
They come in USB and PS2 models.
Here is a Belking model which I have one of.
http://cgi.ebay.com/BELKIN-PS-2-Port-KVM-Switch-with-Cable-w-Audio-F1DL102P_W0QQitemZ360093293198QQcmdZViewItemQQptZCOMP_EN_Networking_Components?hash=item360093293198&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50